![]() ![]() Use safety gloves and protective clothing. Welding arc and spatter burn unprotected skin. Please study these Operation safety instructions and respect them when installing, operating and servicing the machine. ![]() Ensure unhindered circulation of cooling air. Protect from hard rain and intensive sunshine. Do not use a hook or a chain! Place the machine on a horizontal, stable and clean base. Use the front panel handles to move the machine. The fuse rating and the cable diameter are given in the chapter Technical data in the end of this document. The cable may be disconnected and the plug installed only by an authorised electrician! See under “Maintenance”. The machine is supplied with the mains cable installed. A weld is made by moving the welding gun. The wire feeding mechanism feeds wire from a roll through the welding gun nozzle into the arc. The power supply converts the mains voltage suitable for welding. Kempomat is a welding machine with integrated welding current supply and wire feeder. Please also study the Operation safety instructions and respect them when installing, operating and servicing the machine. Read the warning texts carefully and follow the instructions. In this document, for danger to life or injury the following symbol is used: ![]() The specifications and designs presented in this manual are subject to change without prior notice. For further information on Kemppi products please contact us or your nearest Kemppi distributor. Read this manual from front to back before installing, operating or maintaining the equipment for the first time. It also contains maintenance information and technical specifications. This manual is arranged to give you a good understanding of the equipment and its safe operation. Properly installed Kemppi products should prove to be productive machines requiring maintenance at only regular intervals. TERMS OF GUARANTEE.Ĭongratulations on having purchased this product. Regular maintenance.ĭISPOSAL OF THE MACHINE. MAINTENANCE OF WELDING UNIT.ĭaily maintenance. Polarity for welding.Īdjustment of arc roughness/Kempomat 2100.Įarthing. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |